Natural Engineering Plastic PTFE Sheet - 0.25mm To 2mm

Sale price£13.99




  • PTFE sheet is a great material for high-temperature and low-friction applications.
  • It has a number of advantages that make it a good choice: Its coefficient of friction is the third-lowest of any known solid material
  • It has excellent dielectric properties and is suitable for use as a material for printed circuit boards used at microwave frequencies
  • PTFE sheet is one of the most thermally stable plastic materials displaying no appreciable decompositions at 260°C and retaining most of its properties
  • Its high melting temperature makes it a good choice as a high-performance substitute for the weaker and lower melting point polyethylene that is commonly used in low-cost applications


  • While the PTFE sheet is a great choice for many applications, it does have a few disadvantages to be considered: It has almost no “plastic memory" and is subject to creep, which can be advantageous when used as a seal, but to limit this effect a version of PTFE with fillers must be used
  • PTFE sheet is described as soft and can damage or distort when being clamped.It wouldn’t be described as being tough or having a high tensile strength
  • PTFE sheet decomposes above 350 °C and the degradation by-products can be lethal to birds and can cause flu-like symptoms in humans.

PTFE Sheet Perform:

  • Components made with PTFE sheets have exceptional resistance to high as well as low temperatures, chemical reaction, corrosion, and stress cracking.
  • The electrical and low-friction properties of PTFE make it a preferred material for a number of applications and for different processing techniques.


  • Owing to its low friction, the PTFE sheet is used for applications where sliding action of parts is needed such as plain bearings, slide plates, etc.
  • In these applications, it performs significantly better than nylon and acetal and it is comparable to UHMWPE, although not as resistant to wear.
  • Its extremely high bulk resistivity makes it an ideal material for fabricating long-life electrets, which are useful devices being the electrostatic analogues of magnets. In optical radiometry, sheets made from PTFE are used for measuring heads in spectroradiometers and broadband radiometers (e.g., luminance meters and UV radiometers) due to their capability to diffuse a transmitting light nearly perfectly.
  • PTFE sheets have high corrosion resistance and are used in laboratory environments as containers for materials such as fluoroantimonic acid.

Machining Characteristics:

  • PTFE sheet is quite a soft engineering plastic and may be difficult to hold without damaging or crushing.
  • Also because of its inherent low friction and resulting “slipperiness”, the PTFE sheet can also make it difficult to work with and hold in place again while being machined.
  • Another consideration is its tendency to produce strings of long swarf, which may wrap around any cutters or tooling.

Can PTFE Sheet be glued or bonded:

  • Here again, the touted low friction and “slipperiness” of PTFE becomes a challenge. PTFE sheet must undergo surface preparation prior to bonding, normally by etching, using a solution of sodium and naphthalene in tetrahydrofuran. Adhesive manufacturers have developed proprietary primers which make it possible for the surface to be primed ready to accept an adhesive. Once the surface of the material is prepared, a number of adhesives can then be used including, epoxies, polyurethanes, and acrylics.
  • Companies such as Loctite® and 3M® have now developed a special acrylic-based adhesive that can bond directly to PTFE without the need for preparation other than a preliminary wipe with a cleaning solvent.

Used In Food Applications:

  • As we all are aware of PTFE is DuPont’s Teflon® lining for cookware which is famous worldwide.

PTFE Sheet Compare For Wear Resistance:

  • The wear of the PTFE sheet will always depend on the roughness of the opposing material as well as speed and the load that is applied but for high wear applications, it would be better to choose other engineering plastics such as UHMWPE.

PTFE Sheet Chemical Resistance:

  • PTFE is pretty much safe against most known elements and compounds. It is attacked only by the alkaline metals in the elementary state, by chlorine trifluoride, and by elementary fluorine at high temperatures and pressures.
  • PTFE doesn’t dissolve in most solvents at temperatures up and around 300°C. Fluorinated hydrocarbons can cause an amount of expansion that is not permanent.
  • Some oils which are highly fluorinated and at temperatures over 300°C can inflict a dissolving effect upon this excellent engineering plastic.

Unique Characteristics:

  • PTFE is so slippery that it is known as the only known material that an animal called a gecko cannot stick!

Size Range, Colours and Availability of  PTFE Sheet:

  • PTFE sheet in white (natural) in colour and is available in thicknesses ranging from 0.5mm up to 50mm

Be Aware of with PTFE Sheet:

  • PTFE sheets can potentially become dangerous when heated over 400°C due to a toxic emission. It has also been shown that PTFE may become a hazard while being machined if PTFE dust or shavings come into contact with extremely high temperatures, such as a lighted cigarette.
  • PTFE breaks down into highly toxic fumes and as a result, if inhaled, the heated PTFE dust via a lit cigarette, for example, can be fatal.

Choose PTFE Sheet:

  • PTFE sheet offers super low friction, high chemical resistance, low and high-temperature capability, resistance to weathering, electrical and thermal insulation, and unrivalled "slipperiness"

Summary For PTFE Sheet :

  • PTFE is the most chemically resistant plastic yet known. Very few chemicals will react with it. Its mechanical strength properties are low compared to other engineering plastics such as nylon, but its properties do remain over a great temperature range. Its working temperatures are exceptional at -240 to +260°C. PTFE has outstanding thermal and electrical insulation properties.
  • And, it is famous for its very low coefficient of friction. It is very difficult to make anything stick to PTFE without specific preparation.

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Maestro Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed