What thickness playground mat do I need for a 2 metre fall height?

To comply with BS EN 1177:2018 for a critical fall height of 2 metres, you need a minimum 40mm thick rubber playground mat. For fall heights up to 3 metres, 50mm thick mats are required. Always confirm HIC (Head Injury Criterion) test data from the supplier for your specific fall height.

What does BS EN 1177 mean for playground surfacing?

BS EN 1177:2018 is the European standard for impact-attenuating playground surfacing. It defines the critical fall height (CFH) a surface must protect against, measured by the Head Injury Criterion (HIC) test. A surface complies with BS EN 1177 if the HIC value does not exceed 1000 for the stated critical fall height.

Are rubber playground mats a good alternative to wet pour?

Yes, interlocking rubber playground tiles are a practical alternative to wet pour rubber surfacing. They are easier to install (no specialist contractor required), can be lifted and replaced if damaged, and are generally more cost-effective for smaller areas. Wet pour is better suited to large continuous areas with complex shapes.

How do I install interlocking rubber playground tiles?

Rubber playground tiles with interlocking edges can be laid directly onto compacted aggregate, concrete or tarmac. Clean and level the base surface, then lock tiles together starting from a corner. No adhesive is required for temporary installations. For permanent installations, tiles can be bonded with compatible rubber adhesive.

How much do rubber playground safety mats cost?

Our rubber playground safety mats start from £22 per tile for standard sizes. Pricing depends on thickness (40mm or 50mm), size and quantity. We offer trade discounts for bulk orders from schools, local authorities and playground contractors — contact us for a project quote.